This set of 18 Bands are for use with Shwacker 100-grain 1.75-inch; Swhacker 100-grain 2-inch; and Swhacker Crossbow Broadheads
How to install shrink tubing:
Place a single band over the tip with the blades fully enclosed in the slot. Slide the band down the ferrule until it is in the slot. Slide the band down the ferrule until it is in the retaining groove. The blades may move slightly. If the band does not stay in the retaining groove, use a heat source such as a pocket lighter or a hair dryer to shrink the band down. Care should be taken to not overheat the band.
CAUTION: Broadheads are EXTREMELY sharp. Serious injury can occur if handled improperly. Please follow the instructions carefully.